This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

Portable CO2 Fractional Laser for Scar Removal

Manufacturer/Factory, Trading Company
Gold Member Since 2015

Suppliers with verified business licenses

Beijing, China
to see all verified strength labels (18)

Basic Info.

Model NO.
RSF200
Transport Package
Aluminum Alloy Case
Specification
CE, ISO13485
Trademark
Risen Beauty
Origin
China
Production Capacity
100units/Month

Product Description

Specification:
Laser mode Fractional Co2 laser
Wavelength 10600nm, far-infrared laser
Pulse Power 30w
Pulse Radio frequency 0.530W
Control Touching switch, microprocessor-controlled
Screen 8.4inch color touch screen
Working mode: 4 modes Continuous; Single pulse; Repeat pulse; Super pulse.
Scan Graphics: 7 graphics Square, rectangle, round, triangle, oval, diamond, line orcustomized
Dot quantity 400 dots at most
Working state Hyper-pulsed mode
Scan modes: 3 modes Sequence scan or Random scan or maximum distance scan
Pulse energy 10mj to 130mj is optional for each dot.
Laser apparatus Sealed off laser device stimulated by direct current
Condenser focus f=100mm
Beam divergence angle 0.3 mrad
Spot size Min 0.1mm at the focus
Radiation time 0.1~1 ms
Interval time 0.1~1 ms
Aiming beam Less than 2mW, 635nm red semiconductor laser
Cooling system Closed loop circulating water
Environment temperature 5-400°C
Relative humidity <80%
Temperature in transit -40-500°C
Humidity in transit <85%
Beam transport device Articulated arm with 7-joint and balance weight
Atomospheric pressure 86.0kkpa-106.0kpa
Warning up time 5 min
N. weight (kg) 40kg
Power supply 220V/110V 50Hz/60Hz

Application:
1.    Application Range of Fractional treatment handpiece
a.    Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b.    Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c.    Reconstruction of photoaging skin.
2.    Application Range of Incision Handpiece
a.    Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b.    In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
 
 
 Advantages
>  Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes
> Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)
>  Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients
>  Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests' unique request.
> 12.1"  TFT touch LCD, rotated 360° gives you a luxury enjoyment;
>  Reserved entry access for laser room ensures a safe treatment
> Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership. 
>  GL016 SPECIFICATION

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company
Registered Capital
500000 RMB
Plant Area
101~500 square meters